Skills to prolong the service life of amusement equipment

The well-known Ferris wheel in Leopold City, Vienna, Austria, was built in 1897 and has been in operation for more than 100 years. It is still in operation and has become a famous local attraction. It not only witnesses the development of the city, but also provides entertainment The importance of equipment maintenance work provides a living example. Practice has proved that good maintenance work can effectively extend the actual service life of amusement equipment, and reduce the profit cost on the premise of ensuring the safe operation of the equipment. The maintenance work of amusement equipment includes the following aspects:

1. Check and maintain the equipment in a timely manner, so as to find problems and solve them in time. In addition, most amusement equipment belongs to mechanical equipment, once it is eroded by rain, snow or other bad weather, it is easy to appear abnormal. Therefore, it is necessary to do a good job of sheltering from rain and snow. If there is water on the amusement equipment, the water should be removed. If the equipment is not used for a long time, it should be properly stored in a ventilated and non-humid place to prevent the equipment from being damaged by humans. The purpose of equipment storage is to prevent rodents and insects from biting, and the deworming work in the warehouse should be done well.

2. The materials of amusement equipment are mostly plastic, glass fiber reinforced plastic and metal. When we clean plastic and fiberglass, we can use soapy water, disinfectant washing powder, bleaching powder, etc. to dilute and soak, then scrub with a soft cloth or soft brush, and then rinse with clean water. If the metal part needs to be rusted, you can use a brush to remove the floating rust and wipe it with a dry cloth; after exposure to the sun, you can spray it with paint, and then spray it again after drying to protect it. Wash, dry and disinfect after the paint is completely dry. When cleaning the circuit part, make sure that the power is turned off, wipe it with a damp cloth that cannot be squeezed out of water, and then turn on the power after it is dry.

3. When maintaining the equipment, it is also necessary to check whether the connecting parts are firm, the metal frequently moving connecting parts, whether the circuit electrical appliances and ordinary parts are damaged, and no spikes should be left in all parts to avoid potential safety hazards. When a serious safety problem is found, the operation should be stopped to avoid the occurrence of safety accidents.